Mastering Weld Inspection & NDE: Your ASME Code Foundation 🛠️
Mastering Weld Inspection & NDE: Your ASME
Code Foundation 🛠️
What You Will Master:
Welding Procedures & Qualification:
Understand WPS, PQR, and welder qualification, including the impact of
essential variables on requalification (ASME IX).
Weld Defects & Acceptance: Identify weld
discontinuities and apply ASME VIII and B31.3 acceptance criteria.
NDE Method Selection & Planning: Learn to
choose the appropriate NDE method based on defect type, geometry, and access,
and develop effective NDE plans.
Advanced NDE Techniques: Gain insight into
advanced Ultrasonic Testing (UT) methods like Phased Array (PAUT) and
Time-of-Flight Diffraction (ToFD).
Welding Processes & Metallurgy: Explore
common arc welding processes (SMAW, GTAW, GMAW/FCAW, SAW) and understand weld
metallurgy, heat-affected zones, and weld joint designs using AWS A2.4 symbols.
Mechanical Testing & Verification:
Comprehend mechanical tests for procedure qualification (tensile, bend, impact)
and learn about Post-Weld Heat Treatment (PWHT), hardness control, and Positive
Material Identification (PMI).
ASME V NDE Applications: Master surface NDE
methods (VT, PT, MT) and volumetric NDE methods (RT, UT) as per ASME V.
Who Should Enroll:
This course is ideal for engineers, inspectors,
technicians, and anyone involved in the fabrication, inspection, or sign-off of
pressure equipment. No prior formal welding or NDE training is required, as the
code context is built from the ground up. A background in engineering,
inspection, or a technical field is sufficient.
For more tips and resources, FOLLOW US!
👉 Daniel Global Shopping Online:

Comments
No prior formal welding or NDE training is assumed — the code context is built from the ground up
Any engineering, inspection or technical background is enough to follow the course
No welding ticket required — this course is about engineering and inspection of welds, not manual welding technique
Helpful but not essential: some exposure to fabrication, pressure equipment or inspection
No software or purchases needed — copies of ASME IX and V are useful alongside the course but not required
Description
Every pressure equipment failure starts somewhere. Most of them start at a weld.
Yet most engineers who inspect welds, accept NDE reports, or sign off fabrication packages learned what they know in fragments — a bit from site, a bit from colleagues, a bit from reading the code under pressure when a non-conformance landed on their desk.
This course gives you the structured, code-grounded foundation you should have had from the start. Aligned to ASME IX, ASME V, ASME VIII and B31.3, it covers welding processes and metallurgy, qualification, PWHT, weld defects and acceptance criteria, and every major NDE method from visual inspection through to phased array UT — in 22 lectures across 6 sections.